1.
|
Attach injection tube assembly to the siphon injector on the pump. |
![](../images/img1.jpg) |
2.
|
Visually inspect the strainer at the end of the injection tube to verify that it is not clogged. |
![](../images/img2.jpg) |
3.
|
Insert the injection tube into the container all the way to the bottom. |
![](../images/img3.jpg) |
4.
|
Set the injection rate by turning the valve clockwise until it is tight. (Note that not all units have an adjustable injection) |
|
5.
|
Install the special black injector nozzle. |
![](../images/img5.jpg) |