1. |
Make sure that gas and oil are in the engine. (See engine owner's manual for oil type and fill instructions). |
![](../images/pw_stat/Picture1.jpg) |
2. |
Replace the oil plug located on top of the pump with the vent plug. (Select Models) |
![](../images/pw_stat/Picture2.jpg) |
3. |
Adjust choke prime as necessary. |
![](../images/pw_stat/Picture3.jpg) |
4. |
Set the engine switch to the "ON" position. |
![](../images/pw_stat/Picture4.jpg) |
5. |
Pull the trigger on the gun (to relieve any back pressure in the pump) while pulling the engine start cord. |
![](../images/pw_stat/Picture5.jpg) |
6. |
As the engine warms up, readjust the choke. |
![](../images/pw_stat/Picture6.jpg) |